Post a project — free

Describe the job. We match the pro.

Reliant Home Hub works like the big list sites — post your project free and get matched with one local DFW pro. Check their on-site written quote against the cost guide below before you hire. Reliant connects you and manages the match; the work is done by independent local contractors.

Free for homeowners — no account, no card. Most requests take about 30 seconds.

Popular:
$0cost to post a project
5 mintarget time to route your request
DFWDallas–Fort Worth service area
A Reliant contractor shaking hands with a homeowner in front of a brick home in DFW
Always free for homeowners
Routing target: under 5 minutes
One matched pro — no spam calls
You pay the pro, never Reliant

Browse services

Pick a trade to start your free request. Every category opens the same 30-second project form with that trade already selected.

More ways we help

Don't see your project? Post it as “Other” and Reliant will match it by hand.

  • General contracting
  • Remodels & make-readies
  • Storm damage cleanup
  • Just about any home project

How Reliant works

The same flow as the national list sites — with a local team in DFW doing the matching instead of an algorithm selling your number to a call center.

1

Tell us the job

Pick the trade, answer a few quick questions, and leave your ZIP and phone. Thirty seconds, no account, no card.

Free — always
2

Reliant matches & manages

We route your project to one local pro who covers your area and your trade, and we stay on the thread until contact is made.

One pro, not a bidding frenzy
3

Check the quote, hire, pay the pro

The pro quotes the job on site, in writing. Hold that quote up against the DFW cost guide below — if it doesn't sit right, Reliant re-routes you for a second one. You pay the pro directly; Reliant never touches your money.

No markup on the work

Post your project — free

Four quick steps. When you finish, submit straight to Reliant — your request lands in our inbox and we route it to one local pro.

Start a project request

1 · Trade2 · The job3 · Your info4 · Review & send

What kind of pro do you need?

Tap one. You can describe the exact job on the next step.

Tell us about the job

Pick the closest match, then add anything the pro should know.


Where is the job, and how does the pro reach you?

Your number goes to Reliant and your one matched pro — nobody else.

Enter a 5-digit ZIP code.
Enter your city.
Enter your name so the pro knows who to ask for.
Enter a 10-digit phone number.

By continuing, you agree Reliant Home Hub may call or text this number about your project and share it with your one matched pro. Message and data rates may apply. Reply STOP to end texts.

Review and send

Check it over, then submit it straight to Reliant. We route it to a local pro — target: under 5 minutes during business hours.



Email instead
Submitted — your request is on its way. Reliant will confirm by text and introduce your matched pro.

Submitting sends your name, phone, city, ZIP, trade, job and timing to Reliant Home Hub via Formspree so we can match you with one local pro. No account, no card. Prefer email? Use “Email instead” — same team, same routing.

DFW cost guide

Planning ranges Reliant pros in Dallas–Fort Worth typically quote. Your matched pro prices your exact job on site — use this guide to check the written quote before you sign anything.

ProjectTypical DFW rangeWhat moves the price
Roof repairLeaks, missing shingles, flashing$350 – $1,500Pitch and access, how much decking is damaged, matching existing shingles after storm season.
Roof replacementArchitectural shingle, average home$8,500 – $18,000Roof size and pitch, tear-off layers, material grade. Many DFW replacements run through insurance after hail.
AC repairCapacitor, motor, refrigerant, controls$150 – $1,200Part and refrigerant type; full system replacement typically runs $6,500–$12,500 installed.
Water heater replacement40–50 gallon, installed$1,400 – $2,600Tank vs. tankless, gas vs. electric, code upgrades like expansion tanks and drain pans.
Electrical panel upgrade100A to 200A service$1,500 – $3,500Permits, meter base work, and how much rewiring the panel change triggers.
Flooring installationLVP / laminate, labor + materials$4 – $9 / sq ftSubfloor condition, tear-out of old flooring, stairs and transitions. Hardwood runs higher.
Wood privacy fence6 ft cedar, per linear foot$35 – $65 / ftSteel posts vs. wood, gates, haul-off of the old fence, and lot slope.
Interior paintingPer average room, walls only$350 – $800Ceilings and trim, wall repairs, paint grade. Whole-home interiors typically $2,500–$6,500.
Sprinkler system installNew in-ground system, average yard$3,200 – $7,500Number of zones, yard size, smart controller and backflow hardware. Most repairs run $125–$450; broken head swaps are usually $75–$150 per head.
Sprinkler winterizationBlowout and seasonal startup$75 – $150Zone count and whether the spring startup includes head adjustments and a controller check.
Handyman & punch listsSmall repairs, mounting, make-ready lists$95 – $350 / visitNumber of items on the list and whether materials are supplied. Half-day and full-day rates beat hourly billing on longer lists.
Foundation repairSlab piers, pier-and-beam, crack repair$3,500 – $15,000How many piers the lift needs, interior vs. exterior access, and whether drainage correction is part of the fix.
Concrete drivewayNew pour or tear-out and replacement$6 – $12 / sq ftThickness and rebar, tear-out and haul-off of the old drive, and city permit and approach work.
Garage door workSprings, openers, full door replacement$125 – $950+Spring and opener repairs usually run $125–$450; a new installed door starts around $950 and climbs with insulation and windows.
Lawn, tree & cleanup workMowing, trimming, removal, haul-off$50 – $2,500Mowing runs $50–$85 a visit; tree trimming $250–$750, and removals with stump grinding can reach $2,500 on large oaks.

Ranges are planning guides based on typical DFW quotes — not bids. Your matched pro gives you an exact written price before any work starts, and posting the project costs you nothing either way.

For pros: homeowners post free. You get the jobs.

Reliant runs the front door — marketing, intake, screening, routing — and sends you matched projects in your trade and your territory. You quote, you close, you do the work.

Flat monthly plan

$149 / month

A defined slice of the network: your trade, your territory, your daily cap.

  • Matched projects delivered by text, email, and dashboard
  • Delivered with name, phone, city, need, and timing
  • Territory protection — one buyer per trade per area
  • Bad number, duplicate, or wrong-area projects replaced

Revenue-share plan

50% commission share

No monthly bill. Reliant earns a share only when a matched project turns into paid work.

  • Best for contractors who want zero upfront cost
  • Same matched, screened project flow
  • Simple per-job reporting — you report the outcome, we settle the share

Join the pro network

Tell us who you are and where you work. Submit goes straight to Reliant — no account needed.

Enter your business name.
Enter your main city.
Enter a 10-digit phone number.
Email instead
Application submitted. Reliant will call to verify your trade, territory, and daily cap before your first project is routed.

Serving Dallas–Fort Worth

Post from anywhere in the metroplex. If your city isn't listed, post anyway — Reliant matches outlying jobs by hand.

DallasFort WorthArlingtonPlanoIrving GarlandFriscoMcKinneyDentonGrand Prairie MesquiteCarrolltonRichardsonAllenWaxahachie MansfieldBurlesonKellerWeatherfordRockwall

Questions, answered straight

Yes — for homeowners it is free, with no account and no card. Reliant earns its money on the pro side: contractors pay a flat monthly plan or a commission share for matched projects. That is the same model the big list sites use.
Independent local contractors in your trade and area. Reliant Home Hub is the connector and the manager: we run the intake, match your project to one pro, and stay on the thread until contact is made. You hire the pro directly and pay the pro directly.
No. Your project goes to one matched pro for your trade and territory — not sold to a list of callers. If that pro can't take it, Reliant re-routes it and tells you.
Reliant's target is to route every request in under 5 minutes during business hours. Pros are expected to call fast after that; if you haven't heard back the same business day, email us at Ramon@fmg2-0.com and we will chase it down or re-match you.
Check it against the cost guide above, then tell Reliant. We can re-route the project for a second quote. You are never obligated to hire anyone — the request costs you nothing either way.
Two choices: a flat $149/month plan for a defined territory and daily cap, or a 50% revenue-share plan where Reliant is paid only when a matched project becomes paid work. Use the pro form above or email Ramon@fmg2-0.com.
Email Reliant Post a project — free